Super Pen Set
Your complete kit includes: 1 Super Pen and 1 Acu Pen |
| Features + Advantages of New Super Pen |
- Point Location Sensitivity Adjusts for dry and wet skin
- Adjusts Sensitivity Control, Intensity Control and Frequency Control
- Audio Visual Indicator for Point Location and Point Treatment
- Press button to change mode from search to treatmen
- Light in weight and handy in use
|
| |
| The Super Pen is an acupuncture device for the natural treatment of tissue. It can produce proper stimulation to the "Biological Active Points" or "Low Resistance Points" underneath
the epidermis of the human body. The sensor / electrode solely used by the Super Pen is functioned to locate and fix the position of these "point" by way of sensing the surface of peripheral
epidermis of the human body. Then an electrical puse will be stimulating on the aforesaid point for 15-20 seconds by the same sensor/electrode. The treament Application Example Figure indicates
such process should be repeated applied to the various point which need special treatments. |
|
|
|
| |
| Super Pen FS 039A Battery Installation |
 |
| |
| Super Pen FS039A Specification |
| Power Supply |
3V(2 X 1.5V Batteries) |
| Frequency |
3-7.5Hz
Output Intensity 150Vpp(+10%)(Load:100K Ohm) Pulse width:1.6ms |
|
| Output |
0.01-0.9mA |
| Dimension Weight |
Super Pen:138(L) x 23(W) x 9(H) m/m
Package: 230(L) x 70(W) x 45(H) m/m
Weight of Super Pen:34+/-1 gram.(including mercury batteries)
Weight of the whole unite 430+/-10g |
|
| Package Info |
Super Pen with leatherette box
Use manual
2 x LR44 mercury batteries(portable)
2 x UM3(1.5V)batteries(home use)
Dry battery pack |
|
|
|
Attention on Application
No much danger would be caused by low frequency device. Howeverm application on the area where the heart lies should be avoided. Those who have the following symptoms should
refrain them selves from using the device:
Infants under three years of age.
patients who have a heart ailment.
Those who are frequented with epilepsy.
Women who are pregnant.
Those who have skin disease.
Those who have allergic symptom.
Instand of giving treatment, the objective of Super Pen lies in giving relief to the pain which a person suffers temporarily and eliminating uneasiness. As for chronic disease,
please consult your doctor. |
|
|
| |
Effects
The Super Pen can be used by anybody at any place. It is a houshold low frequency treatment device effective for aching found in shoulder, numbness found in the peripheral nervoussystem with the
effect of massage. It is also effective for the problem found in blood circulation , relief of tiredness, aching found in muscle and other illnesses. |
 |
| |
| Direction on USE |
- Slide the power switch 1 upward. At this time the red power indicator 5 will turn on (Fig2). However your attention should be drawn to the fact that the red Power Indicator will not turn
on when the treatment button is being pressed at this time.
- Slide the Intensity Control 2 with adjust the intensity of stimulation which you prefer (Fig3). For instance, adjustment for the weakest intensity should be made in case of giving treatment
to the neck or face.
|
 |
| |
| Location Method of Low Resistance Pints |
Refer to the figure of Application Examples for Treatment to locate the Low Resistance Points based obn the conditions of treatment.Hold the Super Pen in the same manner as though
you were holding a pen. When locating is being made in an area which is comparatively covered with more musclee, incerease the pressure at the same time when chaging the angle of the Super Pen(Fig.4).All
this time the tip of the sensor(9) should be fully kept in steady contact with the epidermis.
For those people who are unfamiliar with the position of Low Resistance Pints and the Acupuncture Points, the following methods are provided for them to locate the position they require through
the application of the Super Pen.
Please practive the following methods carefully, so as to accurately locate the position of Low Resistance Points under different conditions. |
 |
| |
Treatment Button Method
Refer to the figure of Application Examples for Treatment. Then locate the Low Resistance Points.
Move the sensor9 within the rough area of points which are deemed appropriate sa indicated in the Treatment figure, Now keep pressing down Treament Button 8 until you feel painful in the hypodermis.This
indicates that a certain Low Resistance Point is located therein.
Green Indicator Buzzer Method
Move the sensor9 along the rough area of points which are deemed appropriate sa indicated in the treatment figure without pressing down the treatment button. When the position of certain Low
Resistance Point is accurately fixed, the freen indicator 6 will be light on. At this time the red indicator 5 will be light off and the buzzer will sound(Fig.4)
Adjustment of sensitivity Control Button
When executing the method of item 6.2 mentioned above, if the green lamp cannot easily be light on and the buzzer connot easily ring or the green lamp keeps light on and the buzzer keeps Ringing,
adjust the Sensitivity control button 3 in coordination with the location of acupuncture points. The upper the control button is moving, the more sentivity it will become(Fig.6)
Please note that the treatment effect will be the same, no matter what kind of a Low Resistance Points position fixing is emplo7.yed. |
| |
| Treatment Method for Low Resistance Points |
- Once a Low Resistance Point which is appropriatly fixed apply either one of the methods mentioned above. Hold and apply the Super Pen steadily onto this Point. Press down the Treatment Button
8 with your forefinger and start with the teeatment. At this time keep the sensoreelectrode and 9 fully and sreadily in touch with the epidermis area for treatment (Fig.5)
- Keep pressing the treatment button 8, while the gree Indicator 6 and Buzzer will soon be switched off. Keep apply the Treatment Button 8 onto the epidermis. It is suggested that the teatment
should keep for 15-20seconds( each Low resistance Point). By means of the electrode 9 micro pulse stimulating ensure that the treatment is being undertaken(Fig.5)
- Intensity Control 2 can be moved to the minimal or maximal position to decrease of increase the feeling of pulse stimulating ensure that the treatment is being undertakern (Fig.5)
- After treatment, move your finger away from the Treatment Button 8, Lift the Super Pen away from the epidermis. The red Indicator 5 will soon be turned on as indication of completion of
treatment on Low Resistance Point (Fig.7)
- Refer to the figure to further locate Low Resistance Point,and repeat the above mentioned procedure.
- Difficulty in position fixing
The theory of the Super Pen sensor 9 is based on the test and comparison given to the electric resisitance on the epidsrmis of the human body. Due to various factors such electric resistance
varied from person to person. The same person may different skin condition in one day. Consequently, difficulty may be encontered in position fixing when the Green Indicater Buzzer method is employed.
Careful illustrations detailing typical skin condition withe suggestions for the process of locating a certain Low Resistance Point are set below.
Dry Skin: for excessively dry skin(such as being caused by central heating or dry weather), rub it with a wet cloth prior to locaing a certain low resistance
point. Otherwise, the green indicator 6 may not be light on, and the buzzer may not sound.
Oil Skin: excessively oil skin should be eliminated from peripheral skin because it would be unable to effecticely fix the pisition and give treatment to
the low resistance points. The skin condition is oftern experienced on facial areas.
Wet Skin: when locating a certain low electric resistance point, high moisture or sweating(such as being caused by humid temperature, after sporting or
taking a bath) must be dried from the peripheral epidermis. Otherwise, the green Indicator 9 may be light on and the buzzer may keep ringing. Such a skin condition is usually
reflected in the palm.
Therefore, generally speaking, the peripheral epidermis of a certain low resistance point should be cleaned to get rid of its excessive oil or moisture. The oil and moisture on the sensor/electrode
and 9 of the Super Pen should be cleaned with a dry cloth after treatment. It is"Method" be used while difficulies are experienced with the "Green Indicator/Buzzer method" |
| |
| Acu Pen Specification |
| Power Supply |
DC 3V(2 X LR44 Batteries) |
| Frequency |
0.25W |
| Environment |
Temperature: 5~40°C
Humidity:35%~80% |
|
| Package Info |
AcuPen with velour case
Use manual
2 x mercury batteries(portable) |
|
Dimension
Weight |
Acu Pen:138(L) x 23(W) x 10(H) m/m
Package: 215(L) x 50(W) x 30(H) m/m
Weight of Acu Pen:15+/-1gram.(including mercury batteries)
Weight of the whole unite 120g |
|
|
| |
| This Acu Pen is use for search Acupuncture Point from body skin. Easy operate and portable for convene carry, can easily use any time and any place. |
| |
| Before Use: |
- Insert battery with correct polarity into battery housing.
- Press POWER / SENSITIVITY BUTTON 3 second to power on this device.
- Click the POWER / SENSITIVITY BUTTON for sensitivity level setting
- Keeping move the SENSOR around skin for searching acupuncture point location, the buzzer will sound and green LED will on while find out the acupuncture point, the buzzer sound frequency
and ACU. POINT INDICATOR flash frequency will faster while closer to acupuncture point area or slower while away from acupuncture point area.
- Keeping press PROWER / SENSITIVITY BUTTON 3 second for power off the divece.
|
| |
| After Use: |
- Remove the batteries from battery housing.
- Clean the SENSOR head with little wet cloth.
|
| |
| Controls: |
- POWER / SENSITIVITY BUTTON:While this device in power off condition, keeping press this button 3 second for power on. While this device in work, keepping press this button for power off.
- Acupuncture Point Percentage display: This LCD displayer will show Acupuncture Point Percentage reading from 1%~99%during searching the acu. point, While the buzzer in sounding and displayer
reading over 90%. that means alreay ove 90% find out the acupuncture point.
- Sensitivity Setting: Each click the POWER / SENSITIVITY BUTTON will change the sensitivity in I, II, III level. The most sensitivity level is III and lowest sensitivity level is I.
- Llow Battery Display:While the low battery symbol in flash then need change new batteries.
- Auto Power Off: This device will atuo power off after continue 2 minutes without any operate.
|
