|
|
| Laser acupuncture means directly irradiating some key body points on the surface of the skin. |
 |
| Mini Laser - MF 88 Feature: |
- Laser wavelength, 650mm
- Maximum power output 5 mW. Do not stare at laser beam directly or through optical instrument.
- The apparatus can preset three treament times: continuous, 5 min & 10 min. If it is over, the device buzzes and the laser output will be cut off automatically. Turn the laser "Power"switch to "OFF" position and the buzzer will stop buzze.
- Turn the laser "Power" switch to "Laser" position to turn it on for operation. The LED "Laser" will light up.
|
|
| |
| Mini Laser - MF 88 Accessories: |
 |
- Rechargeable Battery x 4
- 9V AC Adaptor x1
- Adhesive Tape x 10
- Laser Probe Round Shape Stand x 2
- Leather Carrying Case x 1
- Instruction Manual x 1
|
|
| |
| How to use Mini Laser - MF 88: |
- Turn the "Power" switch to "Laser" positon to turn of the laser
- Select the time by switching the "Timer" to "Cont", "5 Min" or "10 Min" for the period of treatment duration.
- The laser will automatically turn off when the time set on the "Timer" switch is over.
- The device buzzes and the laser output will be cut off automatically when time is over. Turn the laser "Power" switch to "OFF" position and the buzzer will stop buzze.
|
| |
| Use of Laser Probe Round Shape Stand on Acupuncture Point or Treatment Area. |
 |
- Put the adhesive tape over the Round Shape Stand.
- Put the Round Shape Stand on the skin where the acupuncture point of treatment area is located, and press the tape to stick it against the skin.
- Put the laser probe into the hole of the Round Shape Stand.
- Turn on the laser unit to start treatment.
|
 |
|
| |
| Charging the Battery |
| The operating voltage is 4.8 V with four chargeable AAA battery cells. If the battery voltage is insufficient, the amber lamp "Low BAT" lights up. Turn the power switch to "Charge" position. The device needs about 8 hours charging time by using a 9V DC adaptor. The charged battery can work 8 hours continuously. When the charging is completed, the "Charge" indication lamp will keep lighting up, therefore turn the power switch to "OFF" position so the "Charge" indication lamp will no longer light up. The laser unit can be operated again. |
| |
| Operating with Adaptor |
| When the unit runs out of battery, it can be operated by using a 9V DV adaptor. Plug a 9V DC adaptor into the socket of the device and get the electricity power supply directly, and at the same time turn the power switch to "Laser" position for operation. |
| |
| Mini Laser - MF 88 Technical Specification: |
| Wave Length |
650mm |
| Maximum output |
< 5mw |
| Voltage |
6V |
| Rechargeable Batteries |
1.2V x 4pcs |
| Output |
9V DC 500mA |
| Input |
110V AC 50Hz |
| Main Unit Dimension |
Width x Length x High : 6 x 10 x 2.5 (cm) / 2.4 x 4 x 1(inch) |
| Net Weight |
145 G / 0.32 LB |
| Package Info |
Width x Length x High : 12 x 29 x 12.5 (cm) / 4.8 x 11.6 x 5(inch)
Weight: 685 G / 1.51 LB |
|
|
 |
| Shipping Weight: 0.68 kg |
|
| Shipping Dimension: 12.00 X 29.00 X 12.50 cm |
|
Ground Shipping Cost: $22.00 USD
Above shipping charge is for USA & Canada only. The international shipping price will be subject to the destination. |
|
| This product was added to our catalog on Monday 24 October, 2005. |
| |
|
