|
|
|
|
| INFRARED SLENDER LIMB WRAPS |
FAR INFRARED (FIR) HEAT WRAPS FOR ARMS OR CALVES |
These Limb Wraps harness Infrared thermal energy and use it to penetrate target areas of the body such as arms and lower legs.
Designed for safety: soft waterproof fabric with flexible tensile
capabilities whatever the sitting or standing position. Safe heating
circuits are designed to withstand any stretches or bends.
This system adopts space-age Infrared carbon-fiber technology together
with an advanced electronic control system. Allows easy adjustment of
temperatures and times for individual needs in one or both wraps
simultaneously. |
|
|
 |
| ⋅ |
Relaxes the Muscles and Decreases Muscle Spasms |
| ⋅ |
Good adjunct to fitness/weight loss routines |
| ⋅ |
Lessen Pain |
| ⋅ |
Decrease Stiffness in Tendons and Ligaments |
|
 |
 |
| INFRARED SLENDER LIMB WRAP COMPOSITION AND FUNCTIONS: |
 |
 |
| INFRARED SLENDER LIMB WRAP LOW VOLTAGE MODEL (ANP56A) CONTROLS: |
 |
 |
 |
| HOW TO USE INFRARED SLENDER LIMB WRAP: |
| 1. |
Strap
the Far Infrared Limb Wrap around the chosen body part (arm, lower leg,
thigh). The Far Infrared Limb Wrap should completely surround your body
without becoming creased, doubled over or folded. To achieve the
heating effect, do not strap the Far Infrared Limb Wrap on too tightly. |
| 2. |
Check to see if your household voltage is the same as that printed on the plug before plugging the device in. |
| 3. |
Connect
the Far Infrared Limb Wrap to control box (either one Wrap in one
connection, or both wraps in both connections) and plug in. |
| 4. |
Press
the power switch on, then press ON/OFF button. The red power indicator
will be on, and the temperature and time digital LCD displays a default
setting: temperature: 42°C, time:40min |
|
| 5. |
Press "+" and "-" to adjust temperature (30°C ~ 60°C) and time (0-95min) |
| 6. |
Press Start to heat. |
| 7. |
At
the end of the session, towel off the sweat and wait 15 or 20 minutes
before showering or having a bath, eating or drinking cold drinks. Do
not worry if your skin is reddish: this reaction is due to the constant
temperature it has been exposed to and will disappear after a couple of
hours. |
| 8. |
Once
you have finished your session, take off the Far Infrared Limb Wrap and
spread it out on a flat surface until it cools down. Then clean it with
a damp cloth and dry it. Store in a dry place. |
|
 |
| INFRARED LIMB WRAPS HIGH VOLTAGE MODEL (PH2K): |
 |
|
| Infrared Limb Wrap High Voltage Model Control Panel |
 |
| ON/OFF |
Switches the system 'ON' or 'OFF' |
| Channel Key |
| Selects the respective body zones (1-2-3-4). One or more zones can be targeted in a thermal session. |
|
Temperature Key ( ) |
Press to increase or press to decrease the temperature from 30 °C - 60°, 1 °C for each time pressed. |
|
Timer Key( ) |
Press to increase or press to decrease the time from 5 ~ 95 minutes, 5 minutes for each time pressed. |
|
| Overload Display |
| Overload indicator lights when the power surpasses 300W, and the alarm buzzer will sound. |
|
| Start/Stop Key |
| Press Start/Stop key to start or stop the device after setting the temperature and timer. |
|
|
 |
| INFRARED LIMB WRAPS TECHNICAL SPECIFICATIONS: |
| Voltage |
AC100 -120V 60W |
| Material |
Nylon, Space Carbon Fiber |
| Dimensions (End to End) |
Width x Length : 43 x 50 (cm) / 17.2 x 20 (inches) |
| Temperature |
30°C ~ 60°C *
(Actual temperature may vary when in use) |
| Timer |
0-95 Min |
| Net Weight |
400 g / 0.082 lb (Each Wrap) |
| Package Info |
Width x Length x Height: 19 x 30 x 26 (cm) /
7.6 x 12 x 10.4 (inches)
Weight: 2315 g / 5.1lb
Limb Wrap X 2 ( can be used on arms or calves)
Control Box X 1
Manual X 1 |
|
|
 |
Ground Shipping Cost: $19.00 USD
Above shipping charge is for USA & Canada only. The international shipping price will be subject to the destination. |
 |
| This product was added to our catalog on Monday 10 December, 2007. |
| |
|